Getting Started - UNIT-4

Turn each UNIT-4 on, then choose W+ Link or Bluetooth® with the Mode button. W+ Link uses the transmitter in the box: X04 with UNIT-4, or X02 with UNIT-4 (Model: MKI).

Before you start

Hold the middle button for 2 seconds to turn a speaker on. Double press it to see the battery level.

Steps

Connect with X04

Please follow the steps in How do I pair X04 with UNIT-4?

Connect with X02

Please follow the steps in How do I pair X02 with UNIT-4?

Watch UNIT-4 connect to the transmitter:

Connect over Bluetooth

1. Press the Mode button so the speaker is in Bluetooth.
2. Hold the Mode button for 2 seconds.
3. Press the Stereo/Mono button to choose Left, Right, or Mono.

Watch two UNIT-4 pair over Bluetooth:

Adjust the sound

UNIT-4 is tuned for studio use. In the AIAIAI app, choose a sound profile or set the 5-band EQ.

Download the app from the App Store or Google Play.

If it doesn't work

• The transmitter does not connect. Please follow the steps in the pairing guide for your transmitter, X04 or X02.
• Both UNIT-4 play the same channel. Press the Stereo/Mono button. The settings are Left, Right, and Mono.